Application of Used Oil-Fired Chicken Coop Heating Technology for Reduced Operational Costs

Authors

  • Anhar Khalid Politeknik Negeri Banjarmasin
  • Muhammad Kasim Politeknik Negeri Banjarmasin
  • Norhafani Norhafani Politeknik Negeri Banjarmasin

DOI:

https://doi.org/10.55927/fjst.v4i9.213

Keywords:

Heating, Waste Oil, Efficiency

Abstract

This research aims to develop used oil-fired chicken coop heating technology that can reduce operational costs on farms. In the poultry farming industry, poorly controlled cage temperatures can affect the productivity and health of broiler chickens. Therefore, an efficient and environmentally friendly heating system is needed. One of the solutions offered is the use of used oil as an alternative fuel that has the potential to replace conventional fuels. This research method uses a literature study approach and field survey to obtain data on appropriate heating techniques. The study also examines the application of efficient combustion systems and heating technologies that separate clean air and dirty air. Based on the results of the design, manufacture, and testing of the appliance, it can be concluded that the output produced from the heater is in accordance with the needs of the cage, which is in the temperature range of 32-34°C. In addition, the ventilation system works well, where clean air is expelled through the output, while dirty air is expelled through the exhaust. The layout designed for the combustion process also runs smoothly, supporting the overall efficiency and effectiveness of the system.

References

Adistia, N. A., Nurdiansyah, R. A., Fariko, J., Vincent, V., & Simatupang, J. W. (2020). Potensi Energi Panas Bumi, Angin, Dan Biomassa Menjadi Energi Listrik Di Indonesia. TESLA: Jurnal Teknik Elektro, 22(2), 105.

Boiler - an overview | ScienceDirect Topics. (n.d.).

Budiawati, Y., Perdana, T., & Natawidjaya. (2016). Efficiency Analysis of the Use of Factors of Cassava Productio in Garut Regency. Jurnal Agribisnis Terpadu, 9(13), 1–17.

Cui, Y., Theo, E., Gurler, T., Su, Y., & Saffa, R. (2019). A comprehensive review on renewable and sustainable heating systems for poultry farming. International Journal of Low-Carbon Technologies, 15(1), 121–142.

Hendarti, H., Haryanto, K., & Akuntansi, J. K. (2009). Registrasi Dan Keanggotaan Klub. Seminar Nasional Informatika, 2009(semnasIF), 155–161.

Herlina, F. (2016). Analisa Uji Kekerasan Baja Vcn 150 Pada Poros Baling-Baling Pisau Mesin Crusher. 01(02), 26–32.

Ketut Mahardika, I., Handono, S., Putri Mardiawan, A., Dwi Rahayu, R., & Kunci, K. (2023). Anatomi Suhu Dan Kalor Dalam Teori Koefisien Muai Pada Logam : Fisika Dasar 1. Nusantara Journal of Multidisciplinary Science, 1(4), 796–801.

Komaru, Mumu; Daryanto, E., & ... (2023). Jurnal Insinyur Profesional. Jurnal Insinyur …, 2(2), 38–47.

Konveksi Panas - gambaran umum | Topik ScienceDirect. (n.d.).

Kurniawati, N. (1999). Penentuan Konduktivitas Termal (k) Beberapa Jenis Logam : Aluminium Murni, Baja Tahan Karat (18% Cr, 6% Ni) dan Baja Karbon (0,5% C). In Penelitian Sains (pp. 38–48).

Meilani, H., & Wuryandani, D. (2010). Potensi Panas Bumi sebagai Energi Alternatif Pengganti Bahan Bakar Fosil untuk Pembangkit Tenaga Listrik di Indonesia. Jurnal Ekonomi Dan Kebijakan Publik, 1(1), 47–74.

Palupi, R. (2015). Manajemen Mengatasi Heat Stress pada Ayam Broiler yang Dipelihara Dilahan Kering Heat Stress Management Overcomein Broiler Chickens Reared On Dry Land. Prosiding Seminar Nasional Lahan Suboptimal, 1981, 275–283.

Purwati, N. E., Administrasi, J. I., Ilmu, F., Ilmu, S., Oleo, U. H., & Tenggara, S. (2023). Analisis Faktor Pengembangan Usaha Peternakan Ayam Potong Dengan Sistem Kandang Close House Pada Peternakan Ahmad Wahyudi Di Kolaka Timur. 8(2), 548–569.

Saputraa, A., Samhuddin, S., & Hasanudin, L. (2022). Perancangan Dan Analisis Pengujian Konduktivitas Panas Pada Tipe Material Padat. Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin, 7(1), 22.

Sari, M. (2020). Penelitian Kepustakaan (Library Research) dalam Penelitian Pendidikan IPA. Natural Science, 41–53.

Teknik, M. (n.d.). Metalik : Jurnal Manufaktur ,.

Ummah, M. S. (2019). Pemanfaatan Energi Surya. Sustainability (Switzerland), 11(1), 1–14. publication/305320484_SISTEM_PEMBETUNGAN_TERPUSAT_STRATEGI_MELESTARI

Yuwono, S., Diharto, D., & Pratama, N. W. (2021). Manfaat Pengadaan Panel Surya dengan Menggunakan Metode On Grid. Energi & Kelistrikan, 13(2), 161–171.

Published

2025-09-30